What CE actually is

CE marking is often described as a certificate. It is not. It is a declaration by the manufacturer that the machine meets the applicable European directives, supported by a technical file and a conformity assessment.

For packaging machinery, that usually means the Machinery Directive and, where relevant, the Low Voltage and EMC directives. The manufacturer draws up the technical documentation, carries out the risk assessment, and signs the declaration of conformity. A notified body is only involved for certain categories.

Why some machines do not carry CE: the cost of building the technical file and the testing, and the assumption that the customer's market does not require it. A machine without CE is not necessarily unsafe, but it has no documented conformity, and an EU customs or market-surveillance check can stop it.

Why some machines do not carry it

If a supplier says a machine is CE marked, ask for three things: the declaration of conformity with the model number on it, the technical file reference, and which directives are covered. A supplier who cannot produce the declaration is not selling a CE-marked machine, whatever the label says.

If your market is outside the EU, CE may not be legally required, but it is still a useful signal: a supplier who has built the documentation has thought about guarding, emergency stop, electrical safety and manual content. Those things matter everywhere.

If you are importing into the EU and the machine is not CE marked, the practical routes are to buy a CE-marked machine, or to have the conformity work done before shipment. Retrofitting after arrival is expensive.

What to ask a supplier

Be straightforward with your supplier about the destination country. A supplier who knows the machine is going to the EU will tell you honestly whether they can support it.

We do not currently offer CE on our models and we say so rather than implying otherwise. If your market requires CE, tell us at the enquiry stage and we will be direct about what is possible.