Three closure methods
In electronics plants, small parts and boards are bagged before they are boxed. The packing step gets attention; the sealing step often does not, and it is the one that decides whether the bag arrives closed.
Three closure methods are used with our machines:
Aluminium clips. Flat closure, easy to open, no sharp edge. Suits bags of connectors, small hardware and bakery-style bags. Uses 711 pure aluminium clips, 80,000 per carton.
What changes the choice
Iron nails. Stronger closure for heavier bags. Suits bags that carry more weight or are handled roughly. Uses 712 galvanised iron nails, 80,000 per carton.
Wire tying. Ties the gathered bag neck with wire. Fast, inexpensive per tie, and works on continuous-roll and mesh bags. Uses 1.0 mm galvanised wire, about 1,200 m per roll.
What changes the choice: bag material, bag mouth thickness and how the bag is handled afterwards. A thin anti-static bag needs a closure that does not cut it; a heavy bag of metal parts needs one that does not release.
Throughput at the end of a shift
Two practical points for electronics plants. First, the closure should not puncture the bag above the seal line, or the part is no longer protected. Second, if the bag is opened and resealed in production, a clip is easier to reopen without damaging the bag than a wire tie.
Throughput matters at the end of a shift, when packing is rushed. A machine that closes 50 to 60 bags per minute removes the queue that builds before dispatch.
Tell us your bag size, material and daily count, and we will recommend the closure that suits your packing.
